INVT EC160 User Manual

User manual of EC160 elevator intelligent integrated machine Debugging tools
45
8 F2
After inputting correct password, enter the quick debugging parameters
interface
9 i+j
Power on after pressing the UP and DOWN key at the same time and
then enter the authorization and inquiry mode of the upper computer.
5.5.3 LED indicator instruction
No. Code Description
1 COM On when communication between controller and EC160 is normal
2 FUN On when the setting or monitoring parameter is speed
3 PC On when communication between controller and computer is normal
4 ALM On when no communication for the controller
5 Hz On when the setting or monitoring parameter is frequency
6 A On when the setting or monitoring parameter is current
7 V On when the setting or monitoring parameter is voltage
8 Hz+A On when the setting or monitoring parameter is rotating speed
9 A+V On when the setting or monitoring parameter is percentage
5.5.4 Comparison table of digitron word
Displayed word
Corresponding word
0 1 2 3 4 5
Displayed word
Corresponding word
6 7 8 9 A b
Displayed word
Corresponding word
C d E F H L
Displayed word
Corresponding word
N o P r t U
Displayed word

INVT EC160 Specifications

General

Brand	INVT
Model	EC160
Category	Control Systems
Language	English