Renesas RL78/G1H User Manual

RL78/G1H CHAPTER 18 RF TRANSCEIVER
R01UH0575EJ0120 Rev. 1.20 Page 704 of 920
Dec 22, 2016
18.8 Notice For Using Baseband Function
18.8.1 Notice About Transmission
Do not stop transmit operation.
Reset (initialize) by RFRESETB pin after setting RFSTOP bit to 1 for stopping transmission.
Initialize in same way for stopping in continuous transmission mode and special transmission mode.
18.8.2 Cautions on First and Second Address Filter Match Monitor Bits
(1) When the address filter extension bit is disabled, values of first and second address filter match monitor bits
are invalid.
(2) When the address filter extension bit is enabled, values of first and second address filter match monitor bits
are invalid under the following conditions.
- Frame version: 00, 01
- Frame type: Beacon frame
- No destination PANID and destination address
- Values of source PANID and PAN identifier register match, or value of PAN identifier register = FFFFH
- PANCORD bit = 0

Renesas RL78/G1H Specifications

General

Brand	Renesas
Model	RL78/G1H
Category	Microcontrollers
Language	English