Cover Interposer Tray (B704)
SM 2-71 D062/D063/D065/D066
Installation
2.12.2 INSTALLATION PROCEDURE
The Cover Interposer Tray B704 can be installed on only of the following finishers:
2000-Sheet Booklet Finisher D373
3000-Sheet Finisher D374
3000-Sheet Finisher D460
Removing Tapes and Retainers
Make sure that the finisher is disconnected from the main machine and that the
copier is switched off and unplugged before starting the following procedure.
1. If the finisher is connected to the machine, disconnect it.
To Next Page
Loading...
Need help?
General
