To Next Page

To Previous Page

SM i D373/D374

FINISHER SR4010/SR4040/SR4020/

SR4030 D373/D374

TABLE OF CONTENTS

1. REPLACEMENT AND ADJUSTMENT ............................................1

1.1 COVERS....................................................................................................... 1

1.1.1 EXTERIOR COVERS .......................................................................... 1

1.1.2 UPPER TRAY, END FENCE ............................................................... 2

1.2 MAIN UNIT.................................................................................................... 3

1.2.1 UPPER TRAY LIMIT SENSOR, LIMIT SWITCH.................................. 3

1.2.2 POSITIONING ROLLER ...................................................................... 4

1.2.3 PROOF TRAY EXIT SENSOR............................................................. 4

1.2.4 UPPER TRAY HEIGHT SENSORS 1, 2 .............................................. 5

1.2.5 EXIT GUIDE PLATE, UPPER TRAY EXIT SENSOR .......................... 5

1.2.6 PROOF TRAY FULL SENSOR............................................................ 6

1.2.7 FINISHER ENTRANCE SENSOR ....................................................... 7

1.2.8 PRE-STACK TRAY EXIT SENSOR..................................................... 7

1.3 STAPLER UNIT ............................................................................................ 8

1.3.1 CORNER STAPLER............................................................................ 8

1.3.2 POSITIONING ROLLER ...................................................................... 9

1.4 FOLD UNIT................................................................................................. 10

1.4.1 FOLD UNIT........................................................................................ 10

1.4.2 FOLD UNIT ENTRANCE SENSOR ................................................... 12

1.4.3 FOLD UNIT EXIT SENSOR............................................................... 12

1.4.4 STACK PRESENT SENSOR............................................................. 13

1.4.5 FOLDING HORIZONTAL SKEW ADJUSTMENT (FOR B804 ONLY)

1.4.6 FOLD VERTICAL SKEW ADJUSTMENT (FOR B804 ONLY) ........... 17

1.5 BOOKLET STAPLER UNIT ........................................................................ 19

1.5.1 BOOKLET STAPLER......................................................................... 19

1.5.2 BOOKLET STAPLER MOTOR .......................................................... 19

2. DETAILED SECTION DESCRIPTIONS.........................................22

2.1 COMPONENT LAYOUT ............................................................................. 22

Ricoh D065 User Manual

Questions and Answers: