Service Call Conditions
D062/D063/D065/D066 3-78 SM Appendix
Other system SCs
992 C
The controller received an
unknown SC code from the
engine.
Contact your product specialist.
Network error
993 D
The ASIC program of GW
controller cannot be continued.
Defective ASIC
Defective GW controller
3.1.5 JAM CODES
Here are lists of SC codes that are printed in the SMC report; they do not appear on the
operation panel display.
ADF: Paper Jam Errors
No. Location Position Code
003 Separation Sensor: On P1
004 Skew Correction Sensor: On P1
005 Interval Sensor: On P2
006 Registration Sensor: On P2
007 Exit Sensor: On P2
053 Separation Sensor: Off P1
054 Skew Correction Sensor: Off P1
055 Interval Sensor: Off P2
056 Registration Sensor: Off P2
057 Exit Sensor: Off P2
To Next Page
Loading...
Need help?
General
