Resets
D062/D063/D065/D066 5-8 SM
3. Hold down the "#" key and touch the "Copy/Document Server Features" key.
4. A message will be displayed, then press "Yes".
Resetting Scanner Features Only
The scanner settings in the UP mode can be reset to their defaults with this procedure
1. Make sure that the machine is in the copier standby mode.
2. Push the User Tools key.
3. Hold down the "#" key and touch "Scanner Features" key.
4. A message will be displayed, then press "Yes"
To Next Page
Loading...
Need help?
General
