D163 70 SM
3.2 IFAX TROUBLESHOOTING
Use the following procedures to determine whether the machine or another part of the network is
causing the problem.
Communication
Route
Item Action [Remarks]
General LAN 1. Connection with
the LAN
Check that the LAN cable is connected
to the machine.
Check that the LEDs on the hub are lit.
2. LAN activity Check that other devices connected to the
LAN can communicate through the LAN.
Between IFAX and
PC
1. Network settings
on the PC
Check the network settings on the PC.
[Is the IP address registered in the TCP/IP
properties in the network setup correct?
Check the IP address with the
administrator of the network.]
2. Check that PC
can connect with the
machine
Use the “ping” command on the PC to
contact the machine.
[At the MS-DOS prompt, type ping then the
IP address of the machine, then press
Enter.]
3. LAN settings in
the machine
Check the LAN parameters
Check if there is an IP address conflict
with other PCs.
[Use the “Network” function in the User
Tools.
If there is an IP address conflict, inform the
administrator.]
To Next Page
Loading...
Need help?
General
