SD Card Appli Move
SM 2-171 D146/D147/D148/D149/D150
2.33 SD CARD APPLI MOVE
2.33.1 OVERVIEW
Since there are only two SD card slots (one of them is a service slot), three or more SD card
applications cannot be used simultaneously.
However, if multiple SD card applications are merged, three or more SD card options can be
used.
This function is referred to as the “SD card merge function.”
The “SD card merge function” is a function which enables the use of three or more functions
within the capacity of two SD cards by physically transferring the function of one SD card to other
SD cards (all SD card options can be stored in two SD cards).
However, SD card applications are under license, therefore, since an SD card license after merge
is transferred to the target SD card, it cannot be used even if it is moved to the target machine.
Also, a process to prevent illegal copying is performed.
§ After merge, store the empty SD card in the location shown below.
1. Unlock the lever [A], and then open the right cover [B].
2. Main power switch cover [A].
To Next Page
Loading...
Need help?
General
