Ricoh D147 User Manual

Browser Unit Type M4/M3
D146/D147/D148/D149/D150 2-178 SM
To update EXJS
1. Put the SD card containing the firmware to update with in SD card slot 2 [A], and switch on the
power.
D148/D149/D150:
D146/D147:
2. Wait until the update screen starts.
3. When the update screen is displayed, select [Browser], and press the [Update (#)] button.
4. When "Update done." is displayed, switch the power OFF, and remove the SD card from SD
card slot 2.
5. When updating Extension JavaScript, add the following steps.
6. Switch the power ON.
7. Press the [Default setting/counter] key.
8. Press the [Extension function default setting] button.
9. Press the [Extension function default setting] button on the [Extension function default menu
setting] screen.
10. Stop "Extended JS" on the “Startup setting” condition with a tab.
11. Switch the power OFF.
12. Insert the Extended JavaScript upgrade SD card in SD card slot 2.

Ricoh D147 Specifications

General

Brand	Ricoh
Model	D147
Category	All in One Printer
Language	English