D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
DGS-1100-24P/ME:admin#
show igmp_snooping
Purpose To display IGMP snooping on the Switch.
Syntax
show igmp_snooping [vlan_name <vlan_name 8> |
vlanid<vidlist 1-4094> | all]
Description
The show igmp_snooping command displays IGMP snooping on
the Switch.
Parameters
vlan_name <vlan_name 8> − Displays the I
GMP Snooping on the
Switch.
vlanid <vidlist 1-4094> − Display the VLAN id for IGMP Snooping on
the switch.
All –
Display all current IGMP Snooping configurations on the
Switch.
Restrictions None.
Example usage:
To display IGMP snooping on the Switch:
DGS-1100-24P/ME:admin#show igmp_snooping vlan_name VLAN0001
Command : show igmp_snooping vlan_name VLAN0001
IGMP Snooping Global State : Disabled
VLAN Name : VLAN0001
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Disabled
Querier Role : Non-Querier
Querier IP : 0.0.0.0
State : Enabled
Fast Leave : Enabled
Total Entries: 1
DGS-1100-24P/ME:admin#
config igmp_snooping
Purpose To configure IGMP snooping on the Switch.
Syntax
config igmp_snooping [vlan_name <vlan_name 8> | vlanid
<vidlist 1-4094> | all] {fast_leave [enable | disable] | state
[enable | disable]}(1)
91

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English