DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
config multicast filter
Purpose To configure multicast filtering.
Syntax
config multicast filter [forward | filter]
Description
The config multicast filter command enables filtering of multicast
addresses.
Parameters
forward - Forwards unregistered multicast packets.
filter - Filter unregistered multicast packets.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure multicast filter
DGS-1100-24P/ME:admin#config multicast filter filter
Command : config multicast filter filter
Success.
DGS-1100-24P/ME:admin#
show multicast filter_mode
Purpose To display multicast filtering settings on the Switch.
Syntax
show multicast filter_mode
Description
The show multicast filter_mode command displays the multicast
filtering settings.
Parameters None.
Restrictions None.
Example usage:
To show multicast filtering settings:
DGS-1100-24P/ME:admin#show multicast filter_mode
Command : show multicast filter_mode
Multicast Filter Mode
--------------------------------------------
Forward_unregistered_groups
Purpose To clear FDB entries by ports.
Syntax
clear fdb { port <port> | all }
65
To Next Page
Loading...
Need help?
General