DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Example usage:
To create a link aggregation group:
DGS-1100-24P/ME:admin# create link_aggregation group_id 1
Command : create link_aggregation group_id 1
Success.
DGS-1100-24P/ME:admin#
Purpose To delete a previously configured link aggregation group.
Syntax
delete link_aggregation group_id <value>
Description
The delete link_aggregation group_id command deletes a
previously configured link aggregation group.
Parameters
group_id <value > − Specifies the group ID. The group number
identifies each of the groups.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete link aggregation group:
DGS-1100-24P/ME:admin# delete link_aggregation group_id 1
Command : delete link_aggregation group_id 1
Success.
DGS-1100-24P/ME:admin#
config link_aggregation
Purpose To configure a previously created link aggregation group.
Syntax
config link
_aggregation group_
id <value> ports <por
tlist>
Description
The config link_aggregation command configures a link
aggregation group created with the create link_aggregation
command above.
Parameters
group_id <value> − Specifies the group ID. The group number
identifies each of the groups.
ports <portlist> − Specifies a list of ports to belong to the link
aggregation group.
Restrictions Only administrator-level users can issue this command.
Link aggregation groups may not overlap.
162
To Next Page
Loading...
Need help?
General