D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
DGS-1100-24P/ME:admin#
enable snmp authenticate_traps
Purpose To enable SNMP authentication trap support.
Syntax
enable snmp authenticate_traps
Description
The enable snmp authenticate_traps command enables SNMP
authentication trap support on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To turn on SNMP authentication trap support:
DGS-1100-24P/ME:admin#enable snmp
authenticate_traps
Command : enable snmp authenticate_traps
Success.
DGS-1100-24P/ME:admin#
disable snmp authenticate_traps
Purpose To disable SNMP authentication trap support.
Syntax
disable snmp authenticate_traps
Description
The disable snmp authenticate_traps command disables SNMP
authentication trap support on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the SNMP authentication trap support:
DGS-1100-24P/ME:admin#disable snmp authenticate_traps
Command : disable snmp authenticate_traps
Success.
DGS-1100-24P/ME:admin#
config snmp system_location
Purpose To enter a description of the location of the Switch.
Syntax
config snmp system_location <string 16>
43

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English