D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Description
The clear fdb command clears FDB entries by ports.
Parameters
port <port> − The port number.
all – Specifies all ports on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To clear FDB entry of port 2:
DGS-1100-24P/ME:admin#clear fdb port 2
Command : clear fdb port 2
Success.
DGS-1100-24P/ME:admin#
delete multicast_fdb
Purpose To delete an entry in the Switch’s muticast FDB.
Syntax
delete multicast_fdb <vlan_name 8> <macaddr>
Description
The delete multicast_fdb command deletes an entry in the Switch’s
multicast FDB.
Parameters
<vlan_name 8> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address to be removed from the multicast
forwarding table.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a multicast FDB entry:
DGS-1100-24P/ME:admin#delete multicast_fdb VLAN0001
22-ff-ff-ff-ff-ff
Command : delete multicast_fdb VLAN0001 22-ff-ff-ff-ff-ff
Success.
DGS-1100-24P/ME:admin#
66

D-Link DGS-1100-16/ME Specifications

General

Ports	16 x 10/100/1000BASE-T
Switching Capacity	32 Gbps
Forwarding Rate	23.8 Mpps
Layer	Layer 2
MAC Address Table	8K
Dimensions	440 x 180 x 44 mm
Switch Type	Managed
Humidity	5% to 95% non-condensing
Jumbo Frame Support	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Certifications	CE, FCC

Summary

COMMAND SYNTAX

BASIC SWITCH COMMANDS

User Management and System Configuration

Covers commands for managing user accounts, saving settings, rebooting, and system prompts.

SWITCH PORT COMMANDS

Port Configuration and Status

Details commands for configuring port settings like speed, duplex, and showing port status.

VLAN COMMANDS

VLAN Management

Commands for creating, deleting, and configuring VLANs and port assignments.

IGMP SNOOPING COMMANDS

IGMP Snooping Configuration

Commands to enable, disable, and configure IGMP snooping for VLANs and groups.

MLD SNOOPING COMMANDS

MLD Snooping Configuration

TIME AND SNTP COMMANDS

Time and SNTP Configuration

LLDP COMMANDS

SPANNING TREE PROTOCOL COMMANDS

STP Configuration and Settings

POE COMMANDS

PoE System and Port Configuration