DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Example usage:
To set the surveillance priority 5:
DGS-1100-24P/ME:admin#config voice_vlan priority 5
Command : config voice_vlan priority 5
Success.
DGS-1100-24P/ME:admin#
Purpose Configures Voice VLAN aging time.
Syntax
config voice_vlan aging_time <min 1-65535>
Description To set the aging time of the Voice VLAN. If the port is an automatic
Voice VLAN member, the aging time will be used to remove a port
from the Voice VLAN. The Voice VLAN aging timer will start when
the last voice device stops sending traffic and the MAC address of
this voice device is timed out, The port will be removed from the
Voice VLAN after it expires. When the voice traffic resumes during
the aging time, the aging timer will reset and stop.
Parameters
<min 1-65535> - The aging time to set, the range is 1–65535
minutes.
The default value is 720 minutes.
Restrictions Only administrator-level users can issue this command.
Example usage:
To set the aging time of the Voice VLAN to 600 minutes:
DGS-1100-24P/ME:admin#config voice_vlan aging_time 600
Command : config voice_vlan aging_time 600
Success.
DGS-1100-24P/ME:admin#
153
To Next Page
Loading...
Need help?
General