D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
config mld_snooping
Purpose To configure mld snooping.
Syntax
config mld_snooping [vlan_name <vlan_name 8> | vlanid
<vidlist 1-4094> | all] {fast_leave [enable | disable] | state
[enable | disable]}(1)
Description
The config mld_snooping command defines mld snooping on the
VLAN.
Parameters
vlan_name <vlan_name 8> – S
pecifies that the mld snooping
applies only to this previously created VLAN.
vlanid <vidlist 1-4094> – Specifies that the mld snooping applies
only to this VLAN id.
all – specifies that MLD snooping is to be configured for all VLANs
on the Switch.
state [enable | disable] – Allows the user to enable or disable MLD
snooping for the specified VLAN.
fast_leave [enable | disable] – Allows the user to enable or disable
MLD snooping for the specified VLAN.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure mld snooping:
DGS-1100-24P/ME:admin#config mld_snooping all state enable
Command : config mld_snooping all state enable
Success.
DGS-1100-24P/ME:admin#
config mld_snooping querier
Purpose Used to configure the timers and settings
for the MLD snooping
querier on the Switch.
Syntax
config mld_snooping querier [vlan_name <vlan_name 8> |
vlanid <vidlist 1-4094> | all] state [enable | disable]
Description
The config mld_snooping querier command enables MLD
snooping querier on a specific VLAN.
Parameters
vlan_name <vlan_name 8> − The name of the VLAN for which MLD
snooping is to be configured. Up to 8 characters can be used.
vlanid <vidlist 1-4094> − The VLAN id for which MLD snooping is to
be configured.
all − Specifies all VLAN for which MLD snooping is to be configured.
state [enable | disable] − Enables/Disables MLD Snooping Querier.
Restrictions Only administrator-level users can issue this command.
104

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English