D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Restrictions None.
Example usage:
To display MLD snooping on the Switch:
DGS-1100-24P/ME:admin#show mld_snooping vlan_name
VLAN0001
Command : show mld_snooping vlan_name VLAN0001
MLD Snooping Global State : Disabled
VLAN Name : VLAN0001
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Disabled
Querier Role : Non-Querier
Querier IP : ::
State : Enabled
Fast Leave : Enabled
Total Entries: 1
DGS-1100-24P/ME:admin#
show mld_snooping group
Purpose To display the current MLD snooping group configuration on the
Switch.
Syntax
show mld_snooping group [all | [vlan_name <vlan_name 8> |
vlanid <vidlist 1-4094> | ports <portlist>]
{ipaddress<ipv6addr>}]
Description
The show mld_snooping group
command displays the current
MLD snooping group configuration on the Switch.
The group table shared with IGMP snooping. If MLD snooping and
IGMP snooping are enabled at the same time, the count of dynamic
groups that can be learned will be limited by the number of IGMP
snooping groups that exist
(including static group and dynamic
groups).
Parameters
all – Display all current MLD Snooping group configurations on the
Switch.
vlan_name <vlan_name 8> − The name of the VLAN on which MLD
snooping group configuration information will be displayed. Up to 8
characters can be used.
vlanid <vidlist 1-4094> − The ID of the VLAN on which MLD
snooping group configuration information will be displayed.
ports<portlist> − A port or a range of ports on which MLD snooping
group configuration information will be displayed.
112

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English