D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
9
NETWORK MANAGEMENT (SNMP) COMMANDS
The Switch supports the Simple Network Management Protocol (SNMP) versions 1 and 2c. Users can
specify which version of the SNMP host wants to use to get the trap from the Switch. The following table
lists the security features of the three SNMP versions:
SNMP Version Authentication Method Description
v1 Community String Community String is used for authentication -
NoAuthNoPriv
v2c Community String Community String is used for authentication -
NoAuthNoPriv
The Network Management commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command Parameter
create snmp community
<string 16> [read_only | read_write]
delete snmp community
<string 16>
show snmp community
create snmp host
<ipaddr> [v1 | v2c] <string 16>
delete snmp host
<ipaddr>
show snmp host
enable snmp traps
disable snmp traps
show snmp traps
enable snmp
authenticate_traps
disable snmp
authenticate_traps
config snmp
system_location
<string 16>
config snmp
system_name
<string 32>
config snmp
system_contact
<string 32>
config snmp
linkup_traps
[enable | disable]
config snmp
linkdown_traps
[enable | disable]
37

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English