DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Example usage:
To enable voice vlan with vlanid 3:
DGS-1100-24P/ME:admin#enable voice_vlan vlanid 3
Command : enable voice_vlan vlanid 3
Success.
DGS-1100-24P/ME:admin#
Purpose Disables the global Voice VLAN function.
Syntax
disable voice_vlan
Description To disable the Voice VLAN function on a switch. Whenever the voice
VLAN function is disabled then the Voice VLAN will be unassigned.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable voice vlan:
DGS-1100-24P/ME:admin#disable voice_vlan
Command : disable voice_vlan
Success.
DGS-1100-24P/ME:admin#
config voice_vlan priority
Purpose Configures the priority of the Voice VLAN.
Syntax
config voice_vlan priority <0-7>
Description The Voice VLAN priority will give priority to the Voice VLAN traffic to
distinguish the QoS of the voice traffic from the data traffic.
Parameters
<0-7> - The priority of the voice VLAN, the range is 0 – 7.
The default priority is 5.
Restrictions Only administrator-level users can issue this command.
152
To Next Page
Loading...
Need help?
General