DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Restrictions None.
Example usage:
To display the Switch history log:
DGS-1100-24P/ME:admin#show log index 1-2
Command : show log index 1-2
Index Time Level Description
--------- ------------------- ------------- -----------------------------------------
2 17:55:34 INFO(6) PORT: Giga eth5 link up
1 17:55:31 INFO(6) PORT: Giga eth5 link down
DGS-1100-24P/ME:admin#
Purpose To enable the system log to be sent to a remote host.
Syntax
enable syslog
Description
The enable syslog command enables the system log to be sent to a
remote host.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the syslog function on the Switch:
DGS-1100-24P/ME:admin#enable syslog
Command: enable syslog
Success.
DGS-1100-24P/ME:admin#
Purpose To disable the system log from being sent to a remote host.
Syntax
disable syslog
Description
The disable syslog command disables the system log from being
sent to a remote host.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the syslog function on the Switch:
DGS-1100-24P/ME:admin#disable syslog
55
To Next Page
Loading...
Need help?
General