D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
To configure loop back detection with interval time 500 on the Switch:
DGS-1100-24P/ME:admin#config loopdetect interval_time 500
Command: config loopdetect interval_time 500
Success.
DGS-1100-24P/ME:admin#
show loopdetect
Purpose To display the loop back detection information on the Switch.
Syntax
show loopdetect [global | ports [portlist <portlist> | all]]
Description
The show loopdetect command displays the loop back detection
information on the Switch.
Parameters
global – Display the global setting of loop back detection.
portlist <portlist> − A port or range of ports to be displayed.
all − All ports settings are to be displayed.
Restrictions None.
Example usage:
To display the loop back detection information on the Switch:
DGS-1100-24P/ME:admin#show loopdetect global
Command: show loopdetect global
LBD Global Settings
---------------------------------------------------
Status : Disabled
Interval : 500 sec
Recover Time : 60 sec
Loopback Detection Trap : Disabled
DGS-1100-24P/ME:admin#
36

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English