DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Each command is listed in detail, as follows:
clear screen
Purpose To clear screen.
Syntax
clear screen
Description
Parameters None.
Restrictions None.
Example usage:
To create an administrator-level user account with the username ‘dlink’:
DGS-1100-24P/ME:admin#clear screen
Command : clear screen
DGS-1100-24P/ME:admin#
create account
Purpose To create a user account.
Syntax
create account [admin | user] <username 15>
Description
The create account command creates user accounts with different
priority.
After resetting to factory reset, users can press anything to login the
administrator-level user of the Switch. Users must create an admin-
level account before creating user-level account.
Parameters
admin – To create a admin-level user account.
user − To create a user-level user account.
<username 15> − the account username.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an admin-level user account named ‘dlink’:
DGS-1100-24P/ME:admin#create account admin dlink
Command : create account admin dlink
Success.
DGS-1100-24P/ME:admin#
To Next Page
Loading...
Need help?
General