DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
show eee
Purpose Used to show the eee function state on special port(s).
Syntax
show eee {portlist <portlist>}
Description The show eee command is used to display the eee function state on
the special port(s)
Parameters
portlist <portlist> − Specifies a port or range of ports to be displayed.
Restrictions None.
Example usage:
To show eee state of port 2-10:
DGS-1100-24P/ME:admin#show eee portlist 2-10
Command : show eee portlist 2-10
Port EEE state
------ ---------
2 disable
3 disable
4 disable
5 disable
6 disable
7 disable
8 disable
9 disable
10 disable
DGS-1100-24P/ME:admin#
167
To Next Page
Loading...
Need help?
General