D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
19
MLD SNOOPING COMMANDS
The Switch supports MLDv1- and MLDv2 awareness (excluded MLDv2 source-filtering) snooping.
The MLD Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameter
enable mld_snooping
disable mld_snooping
config mld_snooping
[vlan_name <vlan_name 8> | vlanid <vidlist 1-4094> | all] {fast_leave [enable |
disable] | state [enable | disable]}(1)
config mld_snooping
querier
[vlan_name <vlan_name 8> | vlanid <vidlist 1-4094> | all] state [enable | disable]
create mld_snooping
static_group
[vlan_name<vlan_name 8> | vlanid < vidlist 1-4094> ] <ipv6addr>
config mld_snooping
static_group
[vlan_name <vlan_name 8> | vlanid < vidlist 1-4094> ] < ipv6addr > [ add |
delete] <portlist>
delete mld_snooping
static_group
[vlan_name<vlan_name 8> | vlanid < vidlist 1-4094> ] <ipv6addr>
create mld_snooping
multicast_vlan
<vlan_name 8> <vlanid 2-4094>
config mld_snooping
multicast_vlan
<vlan_name 8> { action [add | delete] [member_port <portlist> | source_port
<portlist> | tag_member_port <portlist >] |state [enable | disable] |
replace_source_ip <ipv6addr> } (1)
delete mld_snooping
multicast_vlan
[name <vlan_name 8>| all]
config mld_snooping
multicast_vlan_group
<vlan_name 8> [add | delete] ipv6_range <mcast_address_range>
enable mld_snooping
multicast_vlan
disable mld_snooping
multicast_vlan
show mld_snooping
multicast_vlan
{name <vlan_name 8>}
show mld_snooping
multicast_vlan_group
{name <vlan_name 8>}
show mld snooping [vlan_name <vlan_name 8> | vlanid<vidlist 1-4094> | all]
show mld_snooping
group
[all | [vlan_name <vlan_name 8> | vlanid <vidlist 1-4094> | ports <portlist>]
{ipaddress<ipv6addr>}]
show mld_snooping
[all | [vlan_name <vlan_name 8> | vlanid <vidlist 1-4094>]<ipv6addr>]
102

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English