D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Description
The show switch command displays information about the Switch
settings, including Device Type, MAC Address, IP configuration,
Hardware/Software version, System information, and Switch
Network configuration.
Parameters None.
Restrictions None.
Example usage:
To display the Switch information:
DGS-1100-24P/ME:admin#show switch
Command: show switch
Device Type : DGS-1100-24/ME Gigabit Metro Access Switch
MAC Address : ec-22-80-40-08-f1
IP Address : 10.90.90.90 (Manual)
VLAN Name : VLAN0001
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Boot PROM Version : Build 1.00.002
Firmware Version : Build 1.00.L001
Hardware Version : B1
System Name : SWITCH
System Location :
System Contact :
Spanning Tree : Disabled
IGMP Snooping : Disabled
MLD Snooping : Disabled
TELNET : Enabled (TCP 23)
SNMP : Disabled
SNTP : Disabled
DGS-1100-24P/ME:admin#
show config
Purpose To display the current configuration settings of the Switch.
Syntax
show config current_config
Description
The show config command is used to list the current status of the
configuration settings of the Switch.
Parameters
current_config − Display system configuration from the software
database, i.e. the current system setting.
Restrictions None.
Example usage:
To display the configuration:
21

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English