D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Example usage:
To define a load-sharing group of ports, group-id 2 with group members ports 1-5:
DGS-1100-24P/ME:admin#config link_aggregation group_id 2 ports 1-5
Command : config link_aggregation group_id 2 ports 1-5
Success.
DGS-1100-24P/ME:admin#
show link_aggregation
Purpose To display the current link aggregation configuration on the Switch.
Syntax
show link_aggregation {group_id <value> }
Description
The show link_aggregation command displays the current link
aggregation configuration of the Switch.
Parameters
group_id <value> − Specifies the group ID. The group number
identifies each of the groups.
Restrictions None.
Example usage:
To display Link Aggregation configuration:
DGS-1100-24P/ME:admin# show link_aggregation
Command : show link_aggregation
Group ID : 2
Type : Static
Member Port : 1-5
Active Port :
DGS-1100-24P/ME:admin#
163

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English