DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Description
The config snmp system_location command enters a description
of the location of the Switch. A maximum of 16 characters can be
used.
Parameters
<string 16> - A maximum of 16 characters are allowed.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the Switch location for ‘HQ5F’:
DGS-1100-24P/ME:admin#config snmp system_location
HQ5F
Command : config snmp system_location HQ5F
Success.
config snmp system_name
Purpose To define the name for the Switch.
Syntax
config snmp system_name <string 32>
Description
The config sysname command defines the name of the Switch.
Parameters
<string 32> - A maximum of 32 characters is allowed.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the Switch name as ‘10ME’:
DGS-1100-24P/ME:admin#config snmp system_name
10ME
Command : config snmp system_name 10ME
Success.
DGS-1100-24P/ME:admin#
config snmp system_contact
Purpose To enter the contact information of the Switch.
Syntax
config snmp system_contact <string 32>
Description
The config snmp system_contact command enters the contact
information of the Switch.
Parameters
<string 32> - A maximum of 32 characters is allowed.
Restrictions Only administrator-level users can issue this command.
44
To Next Page
Loading...
Need help?
General