D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
29
SURVEILLANCE VLAN COMMANDS
The surveillance vlan commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command Parameter
enable
surveillance_vlan
[ name <vlan_name 8> | vlanid <vlanid 1-4094>]
disable
surveillance_vlan
config
surveillance_vlan
priority
<0-7>
config
surveillance_vlan
aging_time
<min 1-65535>
config
surveillance_vlan oui
[add | delete] mac <macaddr> mask <macmask> { component_type [vms | vms_client
| video_encoder | network_storage | other] {description <desc 8>}}
show surveillance_vlan
global
show surveillance_vlan
oui
show surveillance_vlan
device
[ports <portlist> | all]
Each command is listed in detail, as follows:
enable surveillance_vlan
Purpose Enables the global Surveillance VLAN function.
Syntax
enable surveillance_vlan [ name <vlan_name 8> | vlanid <vlanid 1-
4094>]
Description Enables the global Surveillance VLAN function on a switch. To
enable the Surveillance VLAN, the Surveillance VLAN must be
assigned a name and there must be an existing static 802.1Q VLAN.
Parameters
name <vlan_name 32> - The name of the surveillance VLAN
vlanid <vlanid 1-4094> - The VLAN ID of the surveillance VLAN.
Restrictions Only administrator-level users can issue this command.
144

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English