D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
ipaddress<ipv6addr> − Specifies the MLD Snooping group IPv6
address to be displayed.
Restrictions None.
Example usage:
To show mld snooping group:
DGS-1100-24P/ME:admin#show mld_snooping group all
Command : show mld_snooping group all
Total Entries: 0
DGS-1100-24P/ME:admin#
show mld_snooping static_group
Purpose To display the MLD snooping multicast group static member port on
the Switch.
Syntax
show mld_snooping static_group [all | [vlan_name <vlan_name
8> | vlanid <vidlist 1-4094>]<ipv6addr>]
Description
The show mld_snooping static_group
command displays the
MLD snooping multicast group static member ports currently
configured on the Switch.
Parameters
all – Display all MLD Snooping static group configuration.
vlan_name <vlan_name 8> – Specifies the VLAN name of MLD
Snooping that will be displayed.
vlanid <vidlist 1-4094> – Specifies the VLAN ID of MLD Snooping
that will be displayed.
<ipv6addr> – Specifies the MLD Snooping group IPv6 address that
will be displayed.
Restrictions None.
Example usage:
To view the MLD snooping host table on the Switch:
DGS-1100-24P/ME:admin#show mld_snooping static_group all
Command : show mld_snooping static_group all
VLAN ID/Name IPv6 Address Static Member Ports
---------------------- ----------------------------- ------------------------
1 /VLAN0001 ffe1::3 5-8
Total Entries: 1
DGS-1100-24P/ME:admin#
113

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English