D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Syntax
clear counters {ports <porlist>}
Description
The clear counters
command clears the counters used by the
Switch to compile statistics.
Parameters
<portlist> – Specifies a range of ports to be cleared.
Restrictions Only an administrator-level user can issue this command.
Example usage:
To clear the counters:
DGS-1100-24P/ME:admin#clear counters ports 5
Command : clear counters ports 5
Success.
DGS-1100-24P/ME:admin#
clear log
Purpose To clear the Switch’s history log.
Syntax
clear log
Description
The clear log command clears the Switch’s history log.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To clear the log information:
DGS-1100-24P/ME:admin#clear log
Command : clear log
Success.
DGS-1100-24P/ME:admin#
show log
Purpose To display the Switch history log.
Syntax
show log {index <value
_list> | severity [all | informational |
warning]}
Description
The show log
command displays the contents of the Switch’s
history log.
Parameters
index <value_list> − The number of entries in the h
istory log to
display.
severity [all | informational | warning] − Specifies the severity type to
be displayed.
54

D-Link DGS-1100-16/ME Specifications

General

Ports	16 x 10/100/1000BASE-T
Switching Capacity	32 Gbps
Forwarding Rate	23.8 Mpps
Layer	Layer 2
MAC Address Table	8K
Dimensions	440 x 180 x 44 mm
Switch Type	Managed
Humidity	5% to 95% non-condensing
Jumbo Frame Support	9KB
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Certifications	CE, FCC

Summary

COMMAND SYNTAX

BASIC SWITCH COMMANDS

User Management and System Configuration

Covers commands for managing user accounts, saving settings, rebooting, and system prompts.

SWITCH PORT COMMANDS

Port Configuration and Status

Details commands for configuring port settings like speed, duplex, and showing port status.

VLAN COMMANDS

VLAN Management

Commands for creating, deleting, and configuring VLANs and port assignments.

IGMP SNOOPING COMMANDS

IGMP Snooping Configuration

Commands to enable, disable, and configure IGMP snooping for VLANs and groups.

MLD SNOOPING COMMANDS

MLD Snooping Configuration

TIME AND SNTP COMMANDS

Time and SNTP Configuration

LLDP COMMANDS

SPANNING TREE PROTOCOL COMMANDS

STP Configuration and Settings

POE COMMANDS

PoE System and Port Configuration