DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Example usage:
To enable surveillance vlan with vlanid 3:
DGS-1100-24P/ME:admin#enable surveillance_vlan vlanid 3
Command : enable surveillance_vlan vlanid 3
Success.
DGS-1100-24P/ME:admin#
Purpose Disables the global Surveillance VLAN function.
Syntax
disable surveillance_vlan
Description To disable the Surveillance VLAN function on a switch. Whenever
the surveillance VLAN function is disabled then the Surveillance
VLAN will be unassigned.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable surveillance vlan:
DGS-1100-24P/ME:admin#disable surveillance_vlan
Command : disable surveillance_vlan
Success.
DGS-1100-24P/ME:admin#
config surveillance_vlan priority
Purpose Configures the priority of the Surveillance VLAN.
Syntax
config surveillance_vlan priority <0-7>
Description The Surveillance VLAN priority will be the priority associated with the
Surveillance VLAN traffic to distinguish the QoS of the surveillance
traffic from the data traffic.
Parameters
<0-7> - The priority of the surveillance VLAN, the range is 0 – 7.
The default priority is 5.
Restrictions Only administrator-level users can issue this command.
145
To Next Page
Loading...
Need help?
General