D-Link DGS-1100-16/ME User Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
show management_vlan
Purpose To display the management VLAN on the Switch.
Syntax
show management_vlan
Description
The show management_vlan command displays the management
VLAN information on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the management VLAN on the switch:
DGS-1100-24P/ME:admin#show management_vlan
Command: show management_vlan
Management VLAN
VID state
----- --------------
1 Disabled
DGS-1100-24P/ME:admin#
config port_vlan
Purpose To configure the management VLAN on the Switch.
Syntax
config port_vlan <portlist> pvid <vlanid 1-4094>
Description
The config port_vlan command configures the port PVID of VLAN
on the Switch.
Parameters
<portlist> - A port or range of ports to be configured the port PVID.
<vlanid 1-4094> − Specifies the management VLAN ID
on the
Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the PVID of VLAN on the switch:
DGS-1100-24P/ME:admin#config port_vlan 5-8 pvid 2
Command: config port_vlan 5-8 pvid 2
Success.
DGS-1100-24P/ME:admin#
84

D-Link DGS-1100-16/ME Specifications

General

Brand	D-Link
Model	DGS-1100-16/ME
Category	Switch
Language	English