Enterasys Matrix-V V2H124-24 User Manual

User Authentication
3-73
3
Web – Click Security, IP Filter. Enter the addresses that are allowed management
access to an interface, and click Add IP Filtering Entry.
Figure 3-45. Entering IP Addresses to be Filtered
CLI – This example restricts management access for Telnet and SNMP clients.
Console(config)#management telnet-client 192.168.1.19 4-28
Console(config)#management telnet-client 192.168.1.25 192.168.1.30
Console(config)#management snmp-client 10.1.2.3 255.255.255.255 4-28
Console(config)#end
Console#show management telnet-client 4-29
Management IP Filter
TELNET-Client:
Start IP address End IP address
-----------------------------------------------
1. 192.168.1.19 192.168.1.19
2. 192.168.1.25 192.168.1.30
Console#show management snmp-client 4-29
Management IP Filter
SNMP-Client:
Start IP address End IP address
-----------------------------------------------
1. 10.1.2.3 255.255.255.255
Console#

Enterasys Matrix-V V2H124-24 Specifications

General

Brand	Enterasys
Model	Matrix-V V2H124-24
Category	Switch
Language	English