Enterasys Matrix-V V2H124-24 User Manual

Configuring the Switch
3-36
3
Note: The predefined default groups and view can be deleted from the system.
Enabling SNMP
Enables the SNMP agent on the switch for all versions (1, 2c, and 3).
Command Attributes
• SNMP Agent Status – Enables SNMP on the switch.
Web - Click SNMP, Agent Status. Enable the SNMP Agent by marking the Enabled
checkbox, and click Apply.
Figure 3-22. Enabling the SNMP Agent
CLI – The following example enables SNMP on the switch.
Table 3-4. SNMPv3 Security Models and Levels
Model Level Group Read View Write View Security
v1 noAuthNoPriv DefaultROGroup defaultview none Community string only
v1 noAuthNoPriv DefaultRWGroup defaultview defaultview Community string only
v1 noAuthNoPriv user defined user defined user defined Community string only
v2c noAuthNoPriv DefaultROGroup defaultview none Community string only
v2c noAuthNoPriv DefaultRWGroup defaultview defaultview Community string only
v2c noAuthNoPriv user defined user defined user defined Community string only
v3 noAuthNoPriv user defined user defined user defined A user name match only
v3 AuthNoPriv user defined user defined user defined Provides user authentication
via MD5 or SHA algorithms
v3 AuthPriv user defined user defined user defined Provides user authentication
via MD5 or SHA algorithms
and data privacy using DES
56-bit encryption
Console(config)#snmp-server 4-143
Console(config)#

Enterasys Matrix-V V2H124-24 Specifications

General

Brand	Enterasys
Model	Matrix-V V2H124-24
Category	Switch
Language	English