Enterasys Matrix-V V2H124-24 User Manual

Configuring the Switch
3-10
3
CLI – Specify the hostname, location and contact information.
Displaying Switch Hardware/Software Versions
Use the Switch Information page to display hardware/firmware version numbers for
the main board and management software, as well as the power status of the
system.
Field Attributes
Main Board
• Serial Number – The serial number of the switch.
• Number of Ports – Number of built-in RJ-45 ports and expansion ports.
• Hardware Version – Hardware version of the main board.
• Internal Power Status – Displays the status of the internal power supply.
• Redundant Power Status* – Displays the status of the redundant power supply.
* CLI only.
Console(config)#hostname Enterasys Matrix V-Series 4-25
Console(config)#snmp-server location TPS - 2nd Floor 4-140
Console(config)#snmp-server contact David 4-140
Console#show system
System description: Enterasys Networks, Inc. V2H124-24; SW version:
V2.5.2.1
System OID string: 1.3.6.1.4.1.5624.2.1.62
System information
System Up time: 0 days, 5 hours, 3 minutes, and 38.47 seconds
System Name: Enterasys Matrix V-Series
System Location: TPS - 2nd Floor
System Contact: David
MAC address: 00-01-F4-8B-22-80
Web server: enabled
Web server port: 80
Web secure server: enabled
Web secure server port: 443
Telnet server: enable
Telnet server port: 23
Authentication login: RADIUS local
Authentication enabled: local
System MTU size : 1500
POST result
UART Loopback Test......................PASS
Timer Test..............................PASS
DRAM Test ..............................PASS
I2C Initialization......................PASS
Runtime Image Check ....................PASS
PCI Device Check .......................PASS
Switch Driver Initialization............PASS
Switch Internal Loopback Test...........PASS
------------------- DONE --------------------
Console#

Enterasys Matrix-V V2H124-24 Specifications

General

Brand	Enterasys
Model	Matrix-V V2H124-24
Category	Switch
Language	English