Command Line Interface
4-76
4
show cdp
Use this command to display global CDP settings.
Command Mode
Privileged Executive
Example
show cdp interface
Use this command to display CDP interface settings.
Syntax
show cdp interface {interface}
interface
- ethernet unit/port
- unit - This is device 1.
- port - Port number.
Command Mode
Privileged Executive
Example
show cdp neighbors
Use this command to display CDP neighbor information.
Syntax
show cdp neighbors
Command Mode
Privileged Executive
Console#sh cdp
Global CDP information:
Sending CDP packets every 60 seconds
Sending a holdtime value of 180 seconds
Sending CDPvX advertisements is auto enabled
Console#
Console#sh cdp interface eth 1/1
Interface cdp status
-------------- ------------
Ethernet 1/ 1 Auto
Console#
To Next Page
Loading...
Need help?
General