Command Line Interface
4-236
4
network portion of the address provided to the client will be based on this
new domain.
Example
In the following example, the device is reassigned the same address
Related Commands
ip address (4-234)
show ip interface
Use this command to display the settings of an IP interface.
Default Setting
All interfaces
Command Mode
Privileged Exec
Example
Related Commands
show ip redirects (4-236)
show ip redirects
Use this command to show the default gateway configured for this device.
Default Setting
None
Command Mode
Privileged Exec
Console(config)#interface vlan 1
Console(config-if)#ip address dhcp
Console(config-if)#exit
Console#ip dhcp restart
Console#show ip interface
IP interface vlan
IP address and netmask: 10.1.0.54 255.255.255.0 on VLAN 1,
and address mode: Dhcp.
Console#
Console#show ip interface
IP address and netmask: 10.1.0.254 255.255.255.0 on VLAN 1,
and address mode: User specified.
Console#
To Next Page
Loading...
Need help?
General