Command Line Interface
4-144
4
show snmp engine-id
Use this command to show the SNMP engine ID.
Command Mode
Privileged Exec
Example
This example shows the default engine ID.
snmp-server view
Use this command to add an SNMP view that controls user access to the MIB. Use
the
no
form to remove an SNMP view.
Syntax
snmp-server view view-name oid-tree {included | excluded}
no snmp-server view view-name
• view-name - Name of an SNMP view. (Range: 1-64 characters)
• oid-tree - Object identifier of a branch within the MIB tree. Wildcards can be
used to mask a specific portion of the OID string. (Refer to the examples.)
• included - Defines an included view.
• excluded - Defines an excluded view.
Default Setting
defaultview (includes access to the entire MIB tree)
Command Mode
Global Configuration
Command Usage
• Views are used in the snmp-server group command to restrict user access
to specified portions of the MIB tree.
• The predefined view “defaultview” includes access to the entire MIB tree.
Console#show snmp engine-id
Local SNMP engineID: 8000002a8000000000e8666672
Local SNMP engineBoots: 1
Console#
Table 4-44. SNMP Engine ID
Field Description
Local SNMP engineID String identifying the engine ID.
Local SNMP engineBoots The number of times that the engine has (re-)initialized since the snmpEngineID
was last configured.
To Next Page
Loading...
Need help?
General