Enterasys Matrix-V V2H124-24 User Manual

System Management Commands
4-65
4
Frame Size Commands
system mtu
This command sets the maximum transfer unit for traffic crossing the switch. Use the
no form to restore the default setting.
Syntax
system mtu size
no system mtu
size - Specifies the MTU size. (Range: 1500-1548 bytes)
Default Setting
1500 bytes
Command Mode
Global Configuration
Command Usage
The current MTU size can be displayed using the show system command
(see page 4-63).
Example
Table 4-1 Frame Size Commands
Command Function Mode Page
system mtu Sets the maximum transfer unit GC 4-65
Console(config)#system mtu 1548
Console(config)#

Enterasys Matrix-V V2H124-24 Specifications

General

Brand	Enterasys
Model	Matrix-V V2H124-24
Category	Switch
Language	English