Enterasys Matrix-V V2H124-24 User Manual

System Management Commands
4-25
4
Command Mode
Global Configuration
Example
hostname
Use this command to specify or modify the host name for this device. Use the no
form to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
User Access Commands
The basic commands required for management access are listed in this section.
This switch also includes other options for password checking via the console or a
Telnet connection (page 4-9), user authentication via a remote authentication server
(page 4-137), and host access authentication for specific ports (page 4-99).
Console(config)#prompt V2H124-24P
V2H124-24P(config)#
Console(config)#hostname Enterasys Matrix-V Series
Console(config)#
Table 4-9. User Access Commands
Command Function Mode Page
username Establishes a user name-based authentication system at login GC 4-26
enable password Sets a password to control access to the Privileged Exec level GC 4-27

Enterasys Matrix-V V2H124-24 Specifications

General

Brand	Enterasys
Model	Matrix-V V2H124-24
Category	Switch
Language	English