gefran 850 User Manual

80209C_MHW_850-1650-1850_02-2020_ENG_pag. 124
4.15.6. H.P.HI - Maximum heating power
Acronym Scrolling message Submenu Attributes
H.P.HI PID.GR.1 (or PID.GR.2…PID.GR.4) HEATING POWER HIGH LIMIT PID.GR R W
The parameter shows and sets the maximum limit of heating power.
Unit of measurement: %
Options: 0.0...100.0
4.15.7. H.P.LO - Minimum limit of heating power
Acronym Scrolling message Submenu Attributes
H.P.LO PID.GR.1 (or PID.GR.2…PID.GR.4) HEATING POWER LOW LIMIT PID.GR R W
The parameter shows and sets the minimum limit of heating power.
For details, see paragraph “4.13.14. H.P.LO - Minimum limit of heating power” on page 117.
Unit of measurement: %
Options: 0.0...100.0
4.15.8. C.PB - Proportional cooling band or hysteresis in ON-OFF control
Acronym Scrolling message Submenu Attributes
C.PB PID.GR.1 (or PID.GR.2…PID.GR.4) COOLING PROPORTIONAL BAND OR ON/
OFF HYST
PID.GR R W
The parameter shows and sets the proportional cooling band or hysteresis in the ON-OFF control, calculated as a percent-
age of full scale of the main or auxiliary input.
Unit of measurement: %
Options: 0.0...999.9
4.15.9. C.IT - Integral cooling time
Acronym Scrolling message Submenu Attributes
C.IT PID.GR.1 (or PID.GR.2…PID.GR.4) COOLING INTEGRAL TIME PID.GR R W
The parameter shows and sets the integral cooling time.
Unit of measurement: Minutes
Options: 0.00...99.99
4.15.10. C.DT - Derivative cooling time
Acronym Scrolling message Submenu Attributes
C.DT PID.GR.1 (or PID.GR.2…PID.GR.4) COOLING DERIVATIVE TIME PID.GR R W
The parameter shows and sets the derivative cooling time.
Unit of measurement: Minutes
Options: 0.00...99.99

gefran 850 Specifications

General

Brand	gefran
Model	850
Category	Temperature Controller
Language	English