80209C_MHW_850-1650-1850_02-2020_ENG_pag. 168
4.26.11. GT.AD1 – Gateway Address 1
Acronym Scrolling message Submenu Attributes
GT.AD1 GATEWAY ADDRESS ETHER R W
This parameter shows the Gateway 1 address identifying the controller in an Ethernet network.
The parameter is the first field in the complete Gateway address (xxx.xxx.xxx.xxx).
Unit of measurement: Number
Options: 0...255
4.26.12. GT.AD2 – Gateway Address 2
Acronym Scrolling message Submenu Attributes
GT.AD2 GATEWAY ADDRESS ETHER R W
IThis parameter shows the Gateway 2 address identifying the controller in an Ethernet network.
The parameter is the first field in the complete Gateway address(xxx.xxx.xxx.xxx).
Unit of measurement: Number
Options: 0...255
4.26.13. GT.AD3 – Gateway Address 3
Acronym Scrolling message Submenu Attributes
GT.AD3 GATEWAY ADDRESS ETHER R W
This parameter shows the Gateway 3 address identifying the controller in an Ethernet network.
The parameter is the first field in the complete Gateway address (xxx.xxx.xxx.xxx).
Unit of measurement: Number
Options: 0...255
4.26.14. GT.AD4 – Gateway Address 4
Acronym Scrolling message Submenu Attributes
SUB.M4 SUBNET MASK ETHER R W
This parameter shows the Gateway 4 address identifying the controller in an Ethernet network.
The parameter is the first field in the complete Gateway address (xxx.xxx.xxx.xxx).
Unit of measurement: Number
Options: 0...255
4.26.15. TIM.NT – Network Time Protocol server update time
Acronym Scrolling message Submenu Attributes
TIM.NT NETWORK TIME SERVER UPDATE TIME ETHER R W
This parameter shows and updates the server update time for time synchronisation of the controller (Network Time Pro-
tocol).
If the parameter is 0, the automatic updating function will be disabled.
Unit of measurement: hours
Options: 0…9999
To Next Page
Loading...
Need help?
General
