80209C_MHW_850-1650-1850_02-2020_ENG_pag. 82
4.8.26. EVN.H.2 - Event 2 during step hold
Acronym Scrolling message Submenu Attributes
EVN.H.2 PR.STP.1 (o PR.STP.2…PR.STP.192) EVENT DURING STEP HOLD se moda-
lità“Programmatore semplificato”disattiva; o PR.STP.1…PR.STP.16 EVENT
DURING STEP HOLD se modalità“Programmatore semplificato”attiva.
PR.STP R W
The parameter shows and sets the configuration of event 2 during the step hold.
Unit of measurement: -
Options: nonE = Event not modified
On = Event becomes active
OFF = Event becomes inactive
4.8.27. EVN.H.3 - Event 3 during step hold
Acronym Scrolling message Submenu Attributes
EVN.H.3 PR.STP.1 (o PR.STP.2…PR.STP.192) EVENT DURING STEP HOLD se moda-
lità“Programmatore semplificato”disattiva; o PR.STP.1…PR.STP.16 EVENT
DURING STEP HOLD se modalità“Programmatore semplificato”attiva.
PR.STP R W
The parameter shows and sets the configuration of event 3 during the step hold.
Unit of measurement: -
Options: nonE = Event not modified
On = Event becomes active
OFF = Event becomes inactive
4.8.28. EVN.H.4 - Event 4 during step hold
Acronym Scrolling message Submenu Attributes
EVN.H.4 PR.STP.1 (o PR.STP.2…PR.STP.192) EVENT DURING STEP HOLD se moda-
lità“Programmatore semplificato”disattiva; o PR.STP.1…PR.STP.16 EVENT
DURING STEP HOLD se modalità“Programmatore semplificato”attiva.
PR.STP R W
The parameter shows and sets the configuration of event 4 during the step hold.
Unit of measurement: -
Options: nonE = Event not modified
On = Event becomes active
OFF = Event becomes inactive
4.8.29. GROP.R - Group of parameters assigned to ramp
Acronym Scrolling message Submenu Attributes
GROP.R PR.STP.1 (o PR.STP.2…PR.STP.192) CONTROL PARAMETER GROUP DU-
RING STEP RAMP se modalità“Programmatore semplificato”disattiva; o
PR.STP.1…PR.STP.16 CONTROL PARAMETER GROUP DURING STEP RAMP
se modalità“Programmatore semplificato”attiva.
PR.STP R W
The parameter shows and sets the group of control parameters assigned to the step during the ramp.
Unit of measurement: Number
Options: 0...4