80209C_MHW_850-1650-1850_02-2020_ENG_pag. 125
4.15.11. C.P.HI - Maximum limit of cooling power
Acronym Scrolling message Submenu Attributes
C.P.HI PID.GR.1 (or PID.GR.2…PID.GR.4) COOLING POWER HIGH LIMIT PID.GR R W
The parameter shows and sets the maximum limit of cooling power.
Unit of measurement: %
Options: 0.0...100.0
4.15.12. C.P.LO - Minimum limit of cooling power
Acronym Scrolling message Submenu Attributes
C.P.LO PID.GR.1 (or PID.GR.2…PID.GR.4) COOLING POWER LOW LIMIT PID.GR R W
The parameter shows and sets the minimum limit of cooling power.
For details, see paragraph “4.13.21. C.P.LO - Minimum limit of cooling power” on page 119.
Unit of measurement: %
Options: 0.0...100.0
4.15.13. PV.THR - Threshold PV for the activation of the group of PID parameters
Acronym Scrolling message Submenu Attributes
PV.THR PID.GR.1 (or PID.GR.2…PID.GR.4) PV BEYOND WHICH THE GROUP IS ACTIVE PID.GR R W
The parameter shows and sets the PV over which the group of PID parameters is active.
The parameter is shown only if the respective programmer is not enabled.
Unit of measurement: Scale points of main or auxiliary input
Options: LO.SCL...HI.SCL
To Next Page
Loading...
Need help?
General
