INVT EC160 User Manual

User manual of EC160 elevator intelligent integrated machine EC160 configuration
4
No. Type Function name Function instruction Remarks
23
Split-level
protection
The elevator returns to the ground floor for
correction when split-level
Standard
24
Encoder feedback
detection protection
The system judges the current height and
speed by high speed counting. In running
state, if no encoder feedback, the elevator
will stop automatically to avoid top-hitting or
bottom-clashing
Standard
25
Reverse running
protection
The system identifies the direction by high
speed counting. The elevator will stop
automatically if the running direction is
different from the command direction
Standard
26
Entire running time
protection
If the elevator runs for the entire time in
non-inspection state and the leveling switch
has no action, the car will stop running
Standard
27
Feedback detection
of brake travel
switch
Detect the switch. If abnormal, protect
automatically. 20 detect brake travel switch
is defined by F0_13 LINE2, 36 dual brake
detection is defined by F0_12 and 39 triple
brake detection is defined by F0_14
Standard
28
Contact detection of
running contactor
Detect the switch. If abnormal, protect
automatically
Standard
29
Contact detection of
brake contactor
Detect the switch. If abnormal, protect
automatically
Standard
30
Contact detection of
door lock contactor
Detect the circuit. If off, protect
automatically
Optional
31
Contact detection of
safety contactor
Detect the circuit. If off, protect
automatically
Optional
32
Door lock off
protection
If the door lock circuit is off, protect
automatically and output close signal. If the
drive locks IGBT immediately, 137 fault
may occur usually
Standard
33
Lock short circuit
protection
In automatic running mode, detect whether
the door lock is off. If abnormal, protect
automatically
Standard

INVT EC160 Specifications

General

Brand	INVT
Model	EC160
Category	Control Systems
Language	English