INVT EC160 User Manual

User manual of EC160 elevator intelligent integrated machine EC160 configuration
8
No. Type Function name Function instruction Remarks
the opening command and the elevator will
open the door.
55
Repeated
open/close door
If the door of the elevator is not closed after
closing for 20 seconds, the elevator will
open the door. After repeating for 5 times, it
will keep closing. If the door closes but the
lock fails after closing for 10 seconds, the
elevator will open the door. After repeating
for 5 times, it will keep opening.
Standard
56
Automatic control in
opening hours
In non-attendant mode, the elevator will
open the door automatically when arrived.
The opening time can be delayed by setting
T0_00.
Function
selection
57
Opening delay
button
The elevator will keep opening by pressing
the open button (DOD) for the set keeping
time of opening delay T0_16 (The
parameter relates to multi-function output
F0_15=1x and F0_07=1, if any change is
needed, set T0_16 to 0) while it will close
by pressing the close button.
Function
selection
58 Hall opening
When the car stops at some floor, the door
will open when pressing the opening
button.
Standard
59
Internal command
opening
Press the button to open the door if the
elevator is in the leveling position.
Function
selection
60
Pre-close of the
closing button
Press closing button in the automatic state
to close the door in advance.
Standard
61
Closed
maintenance
function
Set closing maintenance according to the
types of door operator F0_02.
Function
selection
62 Service floor setting
Set the stopping floor and closing/ opening
state.
Function
selection
63
Front/rear door
service
Service floor setting through parameters
Function
selection

INVT EC160 Specifications

General

Brand	INVT
Model	EC160
Category	Control Systems
Language	English