•
PRBS 2^23-1 (as specified in ITU-T 0.151)
•
PRBS 2^9-1
•
PRBS 2^11-1
•
PRBS 2^29-1
•
PRBS 2^31-1
•
QRSS 2^20-1 (as specified in ITU-T 0.151)
•
BERT results must be in the following form:
•
Received bit count
•
Received error count
In conformance with ANSI T1.107-1995, the 1-Port Clear Channel DS3/E3 GPIM supports
both generation and detection of FEAC codes, as well as line-loopback activate and
deactivate control codes.
Related
Documentation
• 1-Port Clear Channel DS3/E3 GPIM Overview on page 75
• 1-Port Clear Channel DS3/E3 GPIM Hardware Specifications on page 78
• 1-Port Clear Channel DS3/E3 GPIM Network Interface Specifications on page 24
• 1-Port Clear Channel DS3/E3 GPIM Supported Standards on page 80
• 1-Port Clear Channel DS3/E3 GPIM Key Features on page 77
• 1-Port Clear Channel DS3/E3 GPIM LEDs on page 79
• 1-Port Clear Channel DS3/E3 GPIM Components on page 76
• 1-Port Clear Channel DS3/E3 GPIM Basic Configuration on page 221
81Copyright © 2015, Juniper Networks, Inc.
Chapter 11: 1-Port Clear Channel DS3/E3 GPIM
To Next Page
Loading...
Need help?
General
