Juniper SRX Series User Manual

1-Port T1/E1 Mini-Physical Interface Module Network Interface Specifications
The 1-Port T1/E1 Mini-Physical Interface Module (Mini-PIM) has the network interface
specifications given in Table 17 on page 23.
Table 17: 1-Port T1/E1 Mini-PIM Network Interface Specifications
E1 SpecificationsT1 SpecificationSpecification
Network interface specifications
2.048 Mbps1.544 MbpsTransmit bit rate
2.048 Mbps1.544 MbpsReceive bit rate
HDB3AMI/B8ZSLine encoding
Framed Clear Channel,
Unframed Clear Channel
Framed Clear ChannelMode
G704 without CRC4 UnframedSuperframe (D4/SF), Extended
Superframe (ESF)
Fractional Framing
HDLC features
(E1:N=1 to 31)(T1:N=1 to 24)N x 64 Kbps or N x 56 Kbps,
nonchannelized data rates
16/3216/32CRC
SupportedSupportedShared Flag
SupportedSupportedIdle flag/fill
Runts, Giants, FCS, Error, Abort
Error, Align Error
Runts, Giants, FCS, Error, Abort
Error, Align Error
Counters:
Related
Documentation
1-Port T1/E1 Mini-Physical Interface Module Overview on page 65•
• 1-Port T1/E1 Mini-Physical Interface Module Hardware Specifications on page 66
• 1-Port T1/E1 Mini-Physical Interface Module Supported Standards on page 68
• 1-Port T1/E1 Mini-Physical Interface Module Key Features on page 66
• 1-Port T1/E1 Mini-Physical Interface Module LEDs on page 67
• 1-Port T1/E1 Mini-Physical Interface Module Supported Loopback Diagnostics on page 68
• 1-Port T1/E1 Mini-Physical Interface Module Basic Configuration on page 215
23Copyright © 2015, Juniper Networks, Inc.
Chapter 2: Network Interface Specifications

Juniper SRX Series Specifications

General

Brand	Juniper
Model	SRX Series
Category	Gateway
Language	English