CHAPTER 6
1-Port DOCSIS Mini-Physical Interface
Module
•
1-Port DOCSIS Mini-Physical Interface Module Overview on page 51
•
1-Port DOCSIS Mini-Physical Interface Module Key Features on page 52
•
1-Port DOCSIS Mini-Physical Interface Module Hardware Specifications on page 53
•
1-Port DOCSIS Mini-Physical Interface Module LEDs on page 53
•
1-Port DOCSIS Mini-Physical Interface Module Supported Standards on page 55
1-Port DOCSIS Mini-Physical Interface Module Overview
The Data over Cable System Interface Specifications Mini-Physical Interface Module
(1-Port DOCSIS Mini-PIM) has the following features:
•
Provides a single cable modem interface for connecting to a cable modem termination
system (CMTS) network
•
Supports high-speed, bidirectional data transfer over an existing cable TV system
•
Provides high-speed WAN connectivity
The DOCSIS 3.0 US model of the 1-Port DOCSIS Mini-PIM is supported.
Figure 10 on page 51 shows the front panel of 1-Port DOCSIS Mini-PIM.
Figure 10: DOCSIS Mini-PIM
51Copyright © 2015, Juniper Networks, Inc.