Juniper SRX Series User Manual

Table 3: SRX Series Services Gateway Interface Port Number
Examples (continued)
Interface Number ExampleInterface Type
ct1–1/0/0
ce1–1/0/0
Dual CT1/E1 GPIM
ct1–1/0/0
ce1–1/0/0
Quad CT1/E1 GPIM
Related
Documentation
Installing a Double-High, Double-Wide Gigabit-Backplane Physical Interface Module
on the SRX Series Services Gateway on page 258
•
• SRX Series Services Gateway Mini-Physical Interface Modules Overview on page 7
• SRX Series Services Gateway Gigabit-Backplane Physical Interface Modules Overview
on page 8
• Physical Interface Modules Supported on SRX Series Services Gateways on page 6
• SRX Series Services Gateway Interface Modules and Compatibility on page 11
• SRX Series Services Gateway Interfaces Power and Heat Requirements on page 17
Physical Interface Modules Supported on SRX Series Services Gateways
The SRX Series Services Gateways support the following Mini-Physical Interface Modules
(Mini-PIMs):
•
1-Port small form-factor pluggable (SFP)
•
1-Port Gigabit Ethernet small form-factor pluggable (SFP)
•
ADSL2+
•
DOCSIS
•
G.SHDSL
•
Serial
•
T1/E1
•
VDSL2
The SRX Series Services Gateways support the following Gigabit-Backplane Physical
Interface Modules (GPIMs/XPIMs):
•
Dual CT1/E1 GPIM
•
Quad CT1/E1 GPIM
•
1-Port Clear Channel DS3/E3 GPIM
•
8-Port Serial GPIM
•
2-Port 10-Gigabit Ethernet XPIM
Copyright © 2015, Juniper Networks, Inc.6
SRX Series Services Gateways for the Branch Physical Interface Modules Reference

Juniper SRX Series Specifications

General

Brand	Juniper
Model	SRX Series
Category	Gateway
Language	English